# User and group that workers will use.
user  nginx nginx;

# Number of NGINX workers. Usually it's set, at maximum, 1 worker per CPU core.
# If the server has 2+ CPU cores but it still does not receive many requests, 
# it's a good idea to keep the value to 1 so it will avoid creating idle processes.
worker_processes  auto;

worker_rlimit_nofile 65535;

# NGINX's master process id.
pid        /run/nginx.pid;

events {
    # How many client connections each worker can maintain at a time.
    worker_connections  20480;

    # Using epoll is less CPU intensive when you have to serve thousands of connections, because
    # instead of scanning all connections to see which file descriptor is ready to read/write,
    # it will only scan those which are active.
    # p.s.: It's only available in Linux kernels later than 2.6.
    use                 epoll;

    # multi_accept tries to accept() as many connections as possible after nginx gets notification about a new connection.
    multi_accept        on;
}


# HTTP config module
http {
    # default charset settings
    charset       utf-8,gbk;

    # Note that when SSI is enabled the Last-Modified and Content-Length headers are not sent.
    # default off 
    # ssi off;

    ##
    # MIME-TYPE
    ##

    # You can include other config files using the "include" directive.
    # Here we are including the mime-types, for example.
    include       mime.types;

    # The "application/octet-stream" means that the response is a binary file.
    # If this directive is not defined then response will be set to "text/plain" by default.
    default_type  application/octet-stream;

    ##
    # LOG
    ##
    log_escape_non_ascii off;
   
    log_format main      '$remote_addr - $remote_user [$time_iso8601] "$request" '
                         '$status $body_bytes_sent "$http_referer" '
                         '"$http_user_agent" "$http_x_forwarded_for" "$request_time" "$upstream_addr" "$upstream_response_time" "$request_body" "$host"'; 

    log_format real_ip  '$remote_addr - $remote_user [$time_local] $request_time "$request" '
                        '$status $body_bytes_sent "$http_referer" '
                        '$http_user_agent $http_x_forwarded_for';
   

    log_format post_log '$remote_addr - $remote_user [$time_local] $request_time "$request" '
                        '$status $body_bytes_sent "$request_body" "$http_referer" '
                        '"$http_user_agent" "$http_x_forwarded_for" ';
    # Access log: path and type.
    access_log  /usr/local/openresty/nginx/logs/access.log;
    # Error log: path and type.
    error_log  /usr/local/openresty/nginx/logs/error.log;

    ##
    # TCP
    ##

    # Optimizes data transfer copying data between one file descriptor and another
    # instead of reading and copying data to/from user space.
    sendfile on;

    # Causes NGINX to attempt to send its HTTP response head in one packet,
    # instead of using partial frames. This is useful for prepending headers before calling sendfile,
    # or for throughput optimization.
    tcp_nopush on;

    # Disables the Nagle algorithm.
    # It's useful for sending frequent small bursts of data in real time.
    # tcp_nodelay  off;
    tcp_nodelay  on;

    # Timeout during which a keep-alive client connection will stay open to serve 
    # all the requested files from the server side.
    keepalive_timeout  30s;

    ##
    # GZIP
    ##

    # In production you MUST set gzip to "on" in order to save bandwidth. Web browsers
    # which handle compressed files (all recent ones do) will get a very smaller version
    # of the server response. 
    gzip  on;

    # Enables compression for a given HTTP request version.
    # This module makes it possible to transfer requests to another server.
    # Nginx talks HTTP/1.1 to the browser and HTTP/1.0 to the backend server.
    gzip_http_version 1.0;

    # Compression level 1 (fastest) to 9 (slowest).
    # online suggest
    # gzip_comp_level 6;
    gzip_comp_level 2;
    
    # Enables compression for all proxied requests.
    gzip_proxied any;
    
    # Minimum length of the response (bytes). Responses shorter than this length will not be compressed.
    # online suggest
    # gzip_min_length 10000;
    gzip_min_length  1k;

    # Enables compression for additional MIME-types.
    # online suggest 
    # gzip_types  text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript;
    gzip_types       text/plain application/x-javascript text/css application/xml;

    # Disables gzip compression for User-Agents matching the given regular expression.
    # Is this case we've disabled gzip for old versions of the IE that don't support compressed responses.
    # gzip_disable "MSIE [1-6] \.";

    # Enables or disables inserting the “Vary: Accept-Encoding” response header field 
    # if the directives gzip, gzip_static, or gunzip are active.
    gzip_vary on;

    # Sets the number and size of buffers used to compress a response. 
    # By default, the buffer size is equal to one memory page. 
    # This is either 4K or 8K, depending on a platform.
    gzip_buffers     4 16k;

    ##
    # Client
    ##

    # Directive assigns the maximum number and size of buffers for large headers to read from client request.
    # The request line can not be bigger than the size of one buffer, if the client send a bigger header nginx returns error "Request URI too large" (414).
    # The longest header line of request also must be not more than the size of one buffer, otherwise the client get the error "Bad request" (400).
    large_client_header_buffers 4 4k;

    # Sets the max size for file uploads to 32Mb.
    client_max_body_size 20m;

    # Directive sets the headerbuffer size for the request header from client.
    client_header_buffer_size 4k;

    ##
    # open_file_cache
    ##

    # specifies the maximum number of entries in the cache. 
    # When the cache overflows, the least recently used(LRU) items will be removed;
    # open_file_cache max=65536 inactive=20s;
    open_file_cache off;
    # specifies the time when need to check the validity of the information about the item in open_file_cache.
    # open_file_cache_valid    30s;
    # defines the minimum use number of a file within the time specified in the directive parameter inactive in open_file_cache.
    # If use more than the number, the file descriptor will remain open in the cache.
    # open_file_cache_min_uses 2;
    # specifies whether or not to cache errors when searching for a file.
    # open_file_cache_errors   on;


    ##
    # fastcgi settings
    ##
    fastcgi_connect_timeout 300;
    fastcgi_send_timeout 300;
    fastcgi_read_timeout 300;
    fastcgi_buffer_size 64k;
    fastcgi_buffers 16 64k;
    

    ##
    # fastcgi cache settings
    ##

    add_header                  rt-Fastcgi-Cache $upstream_cache_status;
    fastcgi_cache_path          /usr/local/openresty/nginx/cache/fastcgi_cache/ levels=2:2 keys_zone=cgi_cache:10m inactive=2h max_size=2g;
    fastcgi_cache_key           "$scheme$request_method$host$request_uri";
    fastcgi_cache_use_stale     error timeout invalid_header http_500;
    fastcgi_ignore_headers      Cache-Control Expires Set-Cookie;
    

    ##
    # proxy cache  settings
    ##

    # Sets the path and other parameters of a cache. Cache data are stored in files. 
    # The file name in a cache is a result of applying the MD5 function to the cache key.
    proxy_cache_path    /usr/local/openresty/nginx/cache/proxy_cache/ levels=2:2 keys_zone=cgi_proxy:10m inactive=2h max_size=2g;
    
    # Defines a directory for storing temporary files with data received from proxied servers.
    # Up to three-level subdirectory hierarchy can be used underneath the specified directory
    # proxy_temp_path path [level1 [level2 [level3]]];
    proxy_temp_path     /usr/local/openresty/nginx/cache/temp_path/ 1 2;

    proxy_temp_file_write_size 128k;

    proxy_max_temp_file_size 0;

    # Defines a timeout for establishing a connection with a proxied server. 
    # It should be noted that this timeout cannot usually exceed 75 seconds.
    proxy_connect_timeout      30s;

    # Sets a timeout for transmitting/reading a request to the proxied server. 
    # The timeout is set only between two successive write/read operations, not for the transmission of the whole request. 
    # If the proxied server does not receive anything within this time, the connection is closed.
    proxy_send_timeout         30s;
    proxy_read_timeout         30s;

    # Sets the size of the buffer size used for reading the first part of the response received from the proxied server. 
    proxy_buffer_size          128k;

    # When buffering is disabled, the response is passed to a client synchronously, immediately as it is received. 
    # nginx will not try to read the whole response from the proxied server. 
    # The maximum size of the data that nginx can receive from the server at a time is set by the proxy_buffer_size directive.
    proxy_buffering            on;

    # Sets the number and size of the buffers used for reading a response from the proxied server, for a single connection. 
    # By default, the buffer size is equal to one memory page. This is either 4K or 8K, depending on a platform.
    proxy_buffers              100 128k;

    # When buffering of responses from the proxied server is enabled, 
    # limits the total size of buffers that can be busy sending a response to the client while the response is not yet fully read. 
    # In the meantime, the rest of the buffers can be used for reading the response and, if needed, buffering part of the response to a temporary file. 
    proxy_busy_buffers_size    128k;
    


    # Load modular configuration files from the conf/vhost directory.
    include vhost/*.conf;
    include vhost/pay/development/*.conf;
    include vhost/pay/test/*.conf;
    include vhost/pay/production/*.conf;
    
    ##
    # CLUSTERS
    ##
    
    # Below the "upstream" is defining some php_backend clusters that are serving a PHP-FPM app.
    # They will handle the requets proxied by NGINX.


    # java commsunny group
    
#    upstream java_443_backend {
#    server 10.30.149.41:50443 weight=30;
#    server 10.30.148.149:50443 weight=30;
#    server 10.31.74.200:50443 weight=30;
#    }
#
#    upstream java_8080_backend {
#    server 10.31.74.200:58080 weight=30;
#    }

# java commsunny group


{% if java_backend_upstream is defined %}
{{ java_backend_upstream }}
{% else %}
upstream java_443_backend {
    # server 10.30.149.41:50443 weight=30; # 165
    server 10.30.148.149:50443 weight=30;  # 243
    server 10.31.74.200:50443 weight=30;   # 106
}

upstream java_8080_backend {
    # server 10.30.149.41:58080 weight=30; # 165
    server 10.30.148.149:58080 weight=30;  # 243
    server 10.31.74.200:58080 weight=30;   # 106
}
{% endif %}

upstream opscenter_backend {
    server 10.31.74.200:8888;
}

upstream jenkins_backend {
    server 10.31.88.120:8080;
}

upstream php_online_backend_http {
    server 10.28.225.116:80; 
#    server 10.25.76.207:80;  
    ip_hash;
}

upstream php_online_backend_https {
    server 10.28.225.116:443;
#    server 10.25.76.207:443;
    ip_hash; 
}

upstream php_test_online_backend_http{
    server 10.28.81.15:80; #
}
    include deny.ip; 

#    server {
#        listen 80 default;
	    # listen <%= @ipaddress_em1 %>:80 default;
        # listen <%= @ipaddress_eth0 %>:80 default;
        # listen 182.18.47.10:80 default;
#        return 500;
#    }

}